PoloPlaz Hardwood Floor Cleaner (1 gallon)
This hardwood floor cleaner is for floors that have a polyurathane finish. Unlike some cleaners, PoloPlaz does not leave a wax residue. This is important because it is not recommended to apply additional coatings of polyurathane on a polyurathane finished floor that has wax residue. Even a small amount of wax residue can prevent the adhesion of the new coat of polyurathane.
PoloPlaz may be diluted up to 50% with water or it may be used full strength. To use, place several Sh-Wipe mop heads into one side of the Double Compartment Bucket. Pour just enough PoloPlaz, full strength or diluted, onto the Sh-Wipes so that they are wet. Wring out one Sh-Wipe so that it is damp and place it on the Sh-Mop base. Move the Sh-Mop on the floor in one direction so that the dust on the floor gathers on one side of the Sh-Wipe. When the first side of the Sh-Wipe is dirty, take it off and flip it over to use the other side. After both sides are soiled, put the dirty Sh-Wipe in the empty side of the Double Compartment Bucket and place a clean Sh-Wipe onto the Sh-Mop. When you are finished, wash the Sh-Wipes in a washing machine.
This hardwood floor cleaner is for floors that have a polyurathane finish. Unlike some cleaners, PoloPlaz does not leave a wax residue. This is important because it is not recommended to apply additional coatings of polyurathane on a polyurathane finished floor that has wax residue. Even a small amount of wax residue can prevent the adhesion of the new coat of polyurathane.
PoloPlaz may be diluted up to 50% with water or it may be used full strength. To use, place several Sh-Wipe mop heads into one side of the Double Compartment Bucket. Pour just enough PoloPlaz, full strength or diluted, onto the Sh-Wipes so that they are wet. Wring out one Sh-Wipe so that it is damp and place it on the Sh-Mop base. Move the Sh-Mop on the floor in one direction so that the dust on the floor gathers on one side of the Sh-Wipe. When the first side of the Sh-Wipe is dirty, take it off and flip it over to use the other side. After both sides are soiled, put the dirty Sh-Wipe in the empty side of the Double Compartment Bucket and place a clean Sh-Wipe onto the Sh-Mop. When you are finished, wash the Sh-Wipes in a washing machine.
This hardwood floor cleaner is for floors that have a polyurathane finish. Unlike some cleaners, PoloPlaz does not leave a wax residue. This is important because it is not recommended to apply additional coatings of polyurathane on a polyurathane finished floor that has wax residue. Even a small amount of wax residue can prevent the adhesion of the new coat of polyurathane.
PoloPlaz may be diluted up to 50% with water or it may be used full strength. To use, place several Sh-Wipe mop heads into one side of the Double Compartment Bucket. Pour just enough PoloPlaz, full strength or diluted, onto the Sh-Wipes so that they are wet. Wring out one Sh-Wipe so that it is damp and place it on the Sh-Mop base. Move the Sh-Mop on the floor in one direction so that the dust on the floor gathers on one side of the Sh-Wipe. When the first side of the Sh-Wipe is dirty, take it off and flip it over to use the other side. After both sides are soiled, put the dirty Sh-Wipe in the empty side of the Double Compartment Bucket and place a clean Sh-Wipe onto the Sh-Mop. When you are finished, wash the Sh-Wipes in a washing machine.